Simplified Fan Chart Instructions

From BowlingChat Wiki
Revision as of 12:53, 15 November 2010 by Kellytehuna (talk | contribs) (Created page with '==How to determine your Fan Chart angle in the Fitting Instruction== {{Wip}} With your thumb all the way in the ball, lay your fingers over the finger holes. With a grease penc…')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

How to determine your Fan Chart angle in the Fitting Instruction

Work in Progress Work in Progress - Comments Welcome

With your thumb all the way in the ball, lay your fingers over the finger holes. With a grease pencil mark a spot between your fingers at the webbing and a spot between the first knuckles of your fingers. Draw a line through the two points you just created. Make sure the line is at least 4" in length.

Now, draw the grip center line (between the fingers and bisecting the thumb) and measure the angle between the center line and the line drawn previously. From there its a matter of looking up the fan chart to get your lateral pitches.