Measure Axis Rotation & Tilt & Revs

From BowlingChat Wiki
Revision as of 07:41, 30 October 2010 by Megamav (Talk | contribs)

Jump to: navigation, search

- The calculating revs portion of this video assumes a 30fps video. If you want to avoid doing the math there is another method of finding your rev rate, it is actually the method I use most the time. You will still need to use video in a video editing program but instead of counting how many rotations the ball makes in 10 frames, you simply make a note of the frame number at the point of release and the frame number after 1 full rotation, then plug those numbers into the boxes at http://www.bowlspot.com/page/release . You can ignore the third box if you are just interested in your rev rate.

- If you need a video program download MPEG Streamclip. It is not a full featured editor but will allow you to do what you need to do to get these measurements...and it's FREE!

- If you don't have a photo editing program for using the overlay, you can either download GIMP (free) or read this guide:

Bowler Specs Spreadsheet